Aluminum Interlocked

Armor Power Cable
Four Conductor Type MC
XHHW/PVC 600V

A P P L I C A T I O N S
1.
2.
3.
4.
 
Power and lighting circuits
Feeders
Direct burial
Raceways
  
5.
6.
7.
8.
9.
Control and signal circuits
Aerially (when supported by a messenger)
Class I and II, Division 2 hazardous locations
Class III Division 1 and 2 hazardous locations
Suitable for use in trays or racks
S P E C I F I C A T I O N S
1.
2.
3.


4.
5.
Conductor: Stranded soft-drawn bare copper
Insulation: Cross-linked polyethylene (XLP)
Cabling: Insulated conductors are cabled with a ground wire, (fillers where needed) and a binding tape
Ground Wire: Stranded bare copper
Armor: Aluminum interlocked**
6.

7.
8.
9.
Jacket: Sunlight and flame resistant polyvinyl chloride (PVC)
Temperature:
90°C dry, 75°C wet
Voltage:
600 Volts
Industry Approvals:
UL type MC approved for CT use
IEEE 383 flame test
Part
No.
Size
AWG/
MCM
No. of
Conds.
Insul.
Thick
inches
Ground
Wire
Size
AWG
Jacket
Thick
inches
Approx.
O.D.
inches
Amps.*
Dry/Wet
90°C/75°C
Approx.
Weight
lbs/Mft
05-AA-3204 8 4 .045 12 .050 0.86 55/50 500
05-AA-3404 6 4 .045 10 .050 0.95 75/65 675
05AA-3604 4 4 .045 10 .050 1.07 95/85 920
05-AA-3804 2 4 .045 9 .050 1.22 130/115 1290
05-AA-3904 1 4 .055 9 .050 1.36 150/130 1605
05-AA-4004 1/0 4 .055 9 .050 1.46 170/150 1935
05-AA-4104 2/0 4 .055 9 .050 1.56 195/175 2355
05-AA-4204 3/0 4 .055 7 .060 1.71 225/200 2935
05-AA-4304 4/0 4 .055 7 .060 1.88 260/230 3580
05-AA-4404 250 4 .065 7 .060 2.04 290/255 4210
05-AA-4804 350 4 .065 6 .060 2.30 350/310 5635
05-AA-5304 500 4 .065 5 .075 2.63 430/380 7830
05-AA-6004 750 4 .080 4 .085 3.22 535/475 11480
* Amps Per Conductor is in accordance with NEC table 310-16 for not more than three conductors in a raceway, and a conductor temperature of 90°C dry, 75°C wet and an ambient temperature of 30°C.
** Galvanized steel armor available upon request.